* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Atik retounen yo pral aksepte nan 40 jou depi dat resepsyon machandiz yo. Atik pèsonalize pa ka retounen oswa echanje. Atik achte ak yon kat kado elektwonik ka echanje sèlman; rembousman yo pa aplikab.
Kado gratis
Byenveni nan Roymall, sit entènèt pwofesyonèl ou pou achte kado depatman magazen prim. Nou valè ak apresye sipò ou, epi nou vle eksprime rekonesans nou an nan ajoute yon touche eksitasyon siplemantè nan acha ou yo. Lè w ap fè makèt avèk nou, ou pa sèlman jwenn pwodwi ki gen bon jan kalite ki amelyore fòm ou, men ou pral resevwa tou yon kado gratis eksklizif ak chak lòd ou fè. Ou pare pou eksplore koleksyon nou an epi jwenn kado pafè ou yo? Parcou seleksyon nou an nan atik depatman magazen prim, fè lòd ou, epi tann eksitasyon kado gratis ou a ki rive ansanm ak acha ou.
Règleman livrezon
Nou pral travay di pou livre atik ba ou apre resevwa lòd ou yo epi asire yo rive an sekirite. Detay livrezon yo pral bay nan imèl konfimasyon ou.Nan pifò ka, lòd yo trete nan 2 jou.Nan sikonstans espesyal, li pral retade jan sa a: Lè ou fè yon lòd samdi, dimanch oswa jou ferye, li pral retade pou 2 jou..Nòmalman, li bezwen 5-7 jou ouvrab (lendi a vandredi) san yo pa afekte pa reta vòl oswa lòt faktè anviwònman..Paske sèvis livrezon nou an se mondyal, tan livrezon yo pral depann de kote ou ye kidonk li ka bezwen kèk tan epi tanpri rete pasyan si ou nan distri oswa peyi aleka.
1. Règleman Retounen & Echanj
Nou sèlman aksepte atik achte sou roymall.com. Si ou achte nan distribitè lokal nou yo oswa lòt revandè, ou pa ka retounen yo sou bò nou.Atik lavant final oswa kado gratis yo pa akseptab pou retounen.Pou kalifye pou yon retounen, atik ou a dwe itilize epi nan menm kondisyon ke ou te resevwa li. Li dwe tou nan anbalaj orijinal la.Apre resevwa enstriksyon retounen nan men nou, tanpri anbalaje atik retounen ou yo epi depoze pake ou a nan biwo lapòs lokal la oswa yon lòt kurye. Nou pral trete atik retounen oswa echanj ou a nan 3-5 jou ouvrab apre nou resevwa li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Pa gen retounen oswa echanj ka aksepte si pwodwi a te pwodui koutim, ki gen ladan gwosè koutim, koulè koutim, oswa enprime koutim.Bezwen plis èd, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
2.Règleman Rembousman
Ou pral jwenn yon rembousman konplè oswa 100% kredi magazin apre nou resevwa pake retounen an epi verifye li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Tanpri sonje ke frè livrezon ak nenpòt dwa oswa frè yo pa rembousab. Frè livrezon siplemantè yo pa rembousab yon fwa pake a te anbake. Ou responsab pou peye frè sa yo epi nou pa kapab egzante oswa rembouse yo, menm si lòd la retounen tounen vin jwenn nou.Yon fwa nou resevwa ak konfime atik retounen ou a, nou pral voye yon imèl ba ou pou fè ou konnen ke nou te resevwa atik retounen ou a. Nou pral tou fè ou konnen apwobasyon oswa rejè rembousman ou.Si ou gen nenpòt pwoblèm konsènan pwosesis rembousman an, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
This kind of controller has a very large instantaneous welding current, 100 to 200A, and the heat inside the mos tube is also very large! Therefore, when testing the machine, the welding energy should start from the minimum, and the welding can be guaranteed. Don"t set too large! The most important thing is to pay attention to the range of the power supply and the thickness of the welded nickel strip! If the nickel band is too thick, the tube will burn easily!
Notice:
Please read the instructions in the package carefully,We donot provide extra technical support for it.
Please make sure you know how to config it before purchasing.
Features:
1. Wide selection of welding power supply: lithium battery power supply or 12V car battery.
2. The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
3. With LCD display screen, can display welding parameters.
4. The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
5. Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.
6. The board uses 2 Gusi copper to increase the overcurrent capacity.
7. Using 5*300A MOS tubes, non-disassembled MOS tubes.
8. The MOS tube driver adopts the imported special chip driver. The fastest MOS tube can be hit with 20nS. The switch is fast to prevent the explosion of the tube and the non-triode push-pull drive.
9. The MOS drive design adds a transient diode to protect the MOS and prevent the explosion of the tube.
10. 10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.
11.The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.15mm.
12. A 25V10000uF high-frequency low-resistance capacitor is added to the power input for energy compensation, which increases welding stability.
Instructions for Use:
1: Power Connection
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.
2: Switch on and off
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.
3: Screen description and parameter adjustment.
WELD ENERGY: 01-99 (adjustable by up and down keys)
INPUT: Display input power voltage
WELD WAY: Manual / Auto (Adjust via the "square label" button.)
4: Welding
Keep the welding pin clean. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.
Specification:
Material: Metal
Input line length: app.20cm/7.87in
Length of welding pen: app.30cm/11.81in
Color: Red+Blue+Black
Battery: 18650 lithium battery(not included)
Quantity: 1Set
Note:
The controller comes with a 20cm long 10AWG input cable. One end has been crimped with a U-shaped terminal and the other has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply.
There is an ignition switch underneath the control board. After pressing, wait 3 seconds. After the bell rings, the LCD screen lights up and the boot is complete. Press the power switch again to close it.
Please allow 1-2cm size errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Package Included:
1 x Controller
2 x Welding Pen
2Pcs x Power Input Line (Red and Blue)
1 Pair x U-shaped cold-pressed terminal (used to connect to input power)
1 x Black Plug (When you choose manual mode, It need an external trigger switch to connector black plug.)
TLDR: Hold welding electrodes at 45degree angle for strong welds and for 0.15mm nickle 35-40 welding energy
Received it In a normal time frame, in like a month, not too bad. In the package there is the unit itself and all the components you need for it to work. They include a little barrel jack that you can use to connect a pedal switch, but you don't have to have it. They Also include some extra mosfet, in the case of you burning them out. They might come in handy down the road.
The welder works off of a 12v power source. I used a 12 v car battery with 460A of power, but you could probably go with anything that can do above 180-200A.one thing that is kind of annoying is that the included leads for connecting to the battery are short, buuut you can't really complain for 18 eur and also they would be perfect if u used a lipo.
For my first welds I used 0.15 pure nickle strip but no matter how high I set the welding energy it didn't want to stick to the battery. BUT after a little bit of trial and error I figured out that you have to hold the welding electrodes at an about 45degree angle and not straight up. After that discovery pretty much all the welds held strong. I have used it to make this little battery on the picture and for it 35-40 welding energy works the best.
OH and I use the auto mode on the welder, witch means if I connect the electrodes to the nickel, some beeps sound and it welds. Haven't tried the pedal but in my opinion this way works pretty well.
TLDR: Hold welding electrodes at 45degree angle for strong welds and for 0.15mm nickle 35-40 welding energy
Received it In a normal time frame, in like a month, not too bad. In the package there is the unit itself and all the components you need for it to work. They include a little barrel jack that you can use to connect a pedal switch, but you don't have to have it. They Also include some extra mosfet, in the case of you burning them out. They might come in handy down the road.
The welder works off of a 12v power source. I used a 12 v car battery with 460A of power, but you could probably go with anything that can do above 180-200A.one thing that is kind of annoying is that the included leads for connecting to the battery are short, buuut you can't really complain for 18 eur and also they would be perfect if u used a lipo.
For my first welds I used 0.15 pure nickle strip but no matter how high I set the welding energy it didn't want to stick to the battery. BUT after a little bit of trial and error I figured out that you have to hold the welding electrodes at an about 45degree angle and not straight up. After that discovery pretty much all the welds held strong. I have used it to make this little battery on the picture and for it 35-40 welding energy works the best.
OH and I use the auto mode on the welder, witch means if I connect the electrodes to the nickel, some beeps sound and it welds. Haven't tried the pedal but in my opinion this way works pretty well.
TLDR: Hold welding electrodes at 45degree angle for strong welds and for 0.15mm nickle 35-40 welding energy
Received it In a normal time frame, in like a month, not too bad. In the package there is the unit itself and all the components you need for it to work. They include a little barrel jack that you can use to connect a pedal switch, but you don't have to have it. They Also include some extra mosfet, in the case of you burning them out. They might come in handy down the road.
The welder works off of a 12v power source. I used a 12 v car battery with 460A of power, but you could probably go with anything that can do above 180-200A.one thing that is kind of annoying is that the included leads for connecting to the battery are short, buuut you can't really complain for 18 eur and also they would be perfect if u used a lipo.
For my first welds I used 0.15 pure nickle strip but no matter how high I set the welding energy it didn't want to stick to the battery. BUT after a little bit of trial and error I figured out that you have to hold the welding electrodes at an about 45degree angle and not straight up. After that discovery pretty much all the welds held strong. I have used it to make this little battery on the picture and for it 35-40 welding energy works the best.
OH and I use the auto mode on the welder, witch means if I connect the electrodes to the nickel, some beeps sound and it welds. Haven't tried the pedal but in my opinion this way works pretty well.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
For spot welding nickel plated steel strips to batteries to make battery packs. As the spot weld is almost instant it does not overheat the battery which is very important, especially with lithium batteries.
For spot welding nickel plated steel strips to batteries to make battery packs. As the spot weld is almost instant it does not overheat the battery which is very important, especially with lithium batteries.
Answered by Geo1234 on 20/06/2020Helpful (0)
0
Q:
BangGood: Please clearly indicate in your product description whether any other components are required to get started other than the battery. We need better description of the battery requirements. Are you meaning we must use a 12v automobile battery? What kind/voltage of Lithium Ion battery will work? Thanks. JE
BangGood: Please clearly indicate in your product description whether any other components are required to get started other than the battery. We need better description of the battery requirements. Are you meaning we must use a 12v automobile battery? What kind/voltage of Lithium Ion battery will work? Thanks. JE
Lithium battery y or 12V car battery, or Super capacitor is OK ,other components aren't required to get started, which is very convenient.I very like it.
Lithium battery y or 12V car battery, or Super capacitor is OK ,other components aren't required to get started, which is very convenient.I very like it.
Answered by Suzy on 19/06/2020Helpful (0)
0
Q:
Can this be powered by a 12 volt Bench power Supply?
If Yes, what amperage would be required ?
Can this be powered by a 12 volt Bench power Supply?
If Yes, what amperage would be required ?
Definitely not, for this you need at least ***** batteries in parallel, each of which can deliver 20A, so you have 100A available, even more is desirable.
That's why people often make a spot welder from a transformer from a microwave oven (I have one) - it works much better than these solutions (you can weld quite thick strips), but it's not portable, the device is bulky and heavy - that's why I want to buy something like this - for repairs outside my apartment.
Definitely not, for this you need at least ***** batteries in parallel, each of which can deliver 20A, so you have 100A available, even more is desirable._That's why people often make a spot welder from a transformer from a microwave oven (I have one) - it works much better than these solutions (you can weld quite thick strips), but it's not portable, the device is bulky and heavy - that's why I want to buy something like this - for repairs outside my apartment.
the transistors may have been damaged, or the gate control is damaged, causing the transistors to remain on. they should only be pulsed briefly when working.
the transistors may have been damaged, or the gate control is damaged, causing the transistors to remain on. they should only be pulsed briefly when working.
Answered by wingerr on 03/10/2020Helpful (0)
0
Q:
Will this work well with 0.15mm nickel plated steel strips? Or is it not powerful enough?
Will this work well with 0.15mm nickel plated steel strips? Or is it not powerful enough?
Yes, they will provide adequate current if connected directly to the battery, using a cigarette lighter socket 12vdc socket will not provide enough current.
Yes, they will provide adequate current if connected directly to the battery, using a cigarette lighter socket 12vdc socket will not provide enough current.
Answered by tonythetoolguy on 27/07/2020Helpful (0)
0
Q:
what is the weld switch plug used for in the operation.?? What do you connect it to???
what is the weld switch plug used for in the operation.?? What do you connect it to???
That switch is not (as mentioned) the power switch, the welding switch is a manual trigger for welding. A plug is supplied but you need to attatch a switch yourself. You can buy these for pennies here or at other sites. They are meant to be pressed with your foot so your hands are free to manage the weldig pens. Press foot switch once, spotwelder beeps (as a warning to announce it's going to do the business) and then welds it.
That switch is not (as mentioned) the power switch, the welding switch is a manual trigger for welding. A plug is supplied but you need to attatch a switch yourself. You can buy these for pennies here or at other sites. They are meant to be pressed with your foot so your hands are free to manage the weldig pens. Press foot switch once, spotwelder beeps (as a warning to announce it's going to do the business) and then welds it.
I don't know how shipping tracking works. I bought a cheap (17 usd) vacuum cleaner and got full tracking despite hearing before the same that Jorgehpm said (25 USD threshold). Regardless, this is was a question for customer support, not the items question section. While this may no longer help you, hope it helps future buyers.
I don't know how shipping tracking works. I bought a cheap (17 usd) vacuum cleaner and got full tracking despite hearing before the same that Jorgehpm said (25 USD threshold). Regardless, this is was a question for customer support, not the items question section. While this may no longer help you, hope it helps future buyers.
Answered by Scattering on 07/08/2021Helpful (0)
0
Q:
Spot Welder protection is it possible to protect the module against short-circuit with a fuse and if so, what value should the fuse have?
Spot Welder protection is it possible to protect the module against short-circuit with a fuse and if so, what value should the fuse have?
I have the CA20-2K version. Is there any modifications needed on the MCU board? I've tested it, some smoke and smell from burnt components but I can't see any real damage yet.
I have the CA20-2K version. Is there any modifications needed on the MCU board? I've tested it, some smoke and smell from burnt components but I can't see any real damage yet.
I tried this with 2 different batteries on auto mode. I get the series of beeps that indicate it should weld but nothing happens on any power level. Any ideas?
I tried this with 2 different batteries on auto mode. I get the series of beeps that indicate it should weld but nothing happens on any power level. Any ideas?
1. Revisa todas las sodaduras y conexiones del aparato.
2. Usa una batería de coche.
3. Haz las modificaciones adecuadas a tu modelo.
Para ello, como se pueden poner poner enlaces, busca en la web: All Mini Spot Welder versions: circuit Analysis, differences and faults Encontrarás los vídeos de Luca que lo explican con detalle.
1. Check all soda and appliance connections.
2. Use a car battery.
3. Make the right modifications to your model.
To do this, as you can put links, search the web: All Mini Spot Welder versions: circuit analysis, circuit analysis and circuit analysis You will find the videos of Luca that explain it in detail.
Answered by clg on 27/05/2022Helpful (0)
0
Q:
Does your device come with the welding tips or do you have to buy it?
seu aparelho já vem com as pontas de solda ou tem que comprar?