* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Atik retounen yo pral aksepte nan 40 jou depi dat resepsyon machandiz yo. Atik pèsonalize pa ka retounen oswa echanje. Atik achte ak yon kat kado elektwonik ka echanje sèlman; rembousman yo pa aplikab.
Kado gratis
Byenveni nan Roymall, sit entènèt pwofesyonèl ou pou achte kado depatman magazen prim. Nou valè ak apresye sipò ou, epi nou vle eksprime rekonesans nou an nan ajoute yon touche eksitasyon siplemantè nan acha ou yo. Lè w ap fè makèt avèk nou, ou pa sèlman jwenn pwodwi ki gen bon jan kalite ki amelyore fòm ou, men ou pral resevwa tou yon kado gratis eksklizif ak chak lòd ou fè. Ou pare pou eksplore koleksyon nou an epi jwenn kado pafè ou yo? Parcou seleksyon nou an nan atik depatman magazen prim, fè lòd ou, epi tann eksitasyon kado gratis ou a ki rive ansanm ak acha ou.
Règleman livrezon
Nou pral travay di pou livre atik ba ou apre resevwa lòd ou yo epi asire yo rive an sekirite. Detay livrezon yo pral bay nan imèl konfimasyon ou.Nan pifò ka, lòd yo trete nan 2 jou.Nan sikonstans espesyal, li pral retade jan sa a: Lè ou fè yon lòd samdi, dimanch oswa jou ferye, li pral retade pou 2 jou..Nòmalman, li bezwen 5-7 jou ouvrab (lendi a vandredi) san yo pa afekte pa reta vòl oswa lòt faktè anviwònman..Paske sèvis livrezon nou an se mondyal, tan livrezon yo pral depann de kote ou ye kidonk li ka bezwen kèk tan epi tanpri rete pasyan si ou nan distri oswa peyi aleka.
1. Règleman Retounen & Echanj
Nou sèlman aksepte atik achte sou roymall.com. Si ou achte nan distribitè lokal nou yo oswa lòt revandè, ou pa ka retounen yo sou bò nou.Atik lavant final oswa kado gratis yo pa akseptab pou retounen.Pou kalifye pou yon retounen, atik ou a dwe itilize epi nan menm kondisyon ke ou te resevwa li. Li dwe tou nan anbalaj orijinal la.Apre resevwa enstriksyon retounen nan men nou, tanpri anbalaje atik retounen ou yo epi depoze pake ou a nan biwo lapòs lokal la oswa yon lòt kurye. Nou pral trete atik retounen oswa echanj ou a nan 3-5 jou ouvrab apre nou resevwa li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Pa gen retounen oswa echanj ka aksepte si pwodwi a te pwodui koutim, ki gen ladan gwosè koutim, koulè koutim, oswa enprime koutim.Bezwen plis èd, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
2.Règleman Rembousman
Ou pral jwenn yon rembousman konplè oswa 100% kredi magazin apre nou resevwa pake retounen an epi verifye li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Tanpri sonje ke frè livrezon ak nenpòt dwa oswa frè yo pa rembousab. Frè livrezon siplemantè yo pa rembousab yon fwa pake a te anbake. Ou responsab pou peye frè sa yo epi nou pa kapab egzante oswa rembouse yo, menm si lòd la retounen tounen vin jwenn nou.Yon fwa nou resevwa ak konfime atik retounen ou a, nou pral voye yon imèl ba ou pou fè ou konnen ke nou te resevwa atik retounen ou a. Nou pral tou fè ou konnen apwobasyon oswa rejè rembousman ou.Si ou gen nenpòt pwoblèm konsènan pwosesis rembousman an, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
Features:
- High-accuracy voltage detection circuit
- Terminal of the charger using high voltage device
A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium.
The Negative ( -) end of the first cell is connected to the PCB terminal marked B-
The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?)
The (+) Positive end of the second cell is connected to the PCB terminal marked B+
The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative)
Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit.
The board is well made and works as it should.
I hope this clears up some of the questions raised.
A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium.
The Negative ( -) end of the first cell is connected to the PCB terminal marked B-
The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?)
The (+) Positive end of the second cell is connected to the PCB terminal marked B+
The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative)
Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit.
The board is well made and works as it should.
I hope this clears up some of the questions raised.
A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium.
The Negative ( -) end of the first cell is connected to the PCB terminal marked B-
The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?)
The (+) Positive end of the second cell is connected to the PCB terminal marked B+
The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative)
Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit.
The board is well made and works as it should.
I hope this clears up some of the questions raised.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-12 of 12|
Show Original
A part of the QA has been auto-translated.
0
Q:
What input volatges are supported? or do i need a seperate charging circuit despite the name?
What input volatges are supported? or do i need a seperate charging circuit despite the name?
This is suitable for connecting two lithium batteries in series. It is not recommended to use only one lithium battery.
This is suitable for connecting two lithium batteries in series. It is not recommended to use only one lithium battery.
Answered by wujiahui on 16/06/2019Helpful (0)
0
Q:
Can this circuit be specifically used only for 18650, or other li ion batteries will also do, like the one in cell phones, i have two of those from battery bank, there protection board is missing
Can this circuit be specifically used only for 18650, or other li ion batteries will also do, like the one in cell phones, i have two of those from battery bank, there protection board is missing